Planet GUP-805A-60W

1000BASE-X SFP to 1000BASE-T 802.3bt 60W PoE++ Media Converter

 

802.3bt PoE++ 60-watt Power over 4-pair UTP Solution

As PLANET GUP-805A-60W adopts the IEEE 802.bt PoE++ standard technology, it is capable to source up to 60 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each remote PoE compliant powered device (PD). Its power capability is three times more than that of the conventional 802.3at PoE+ and it is an ideal solution for those high power consuming network PDs, such as:

• PoE PTZ speed dome cameras
• Network devices 
• Thin clients
• AIO (all-in-one) touch PCs, point of sale (POS) and information kiosks
• Remote digital signage displays
• PoE lightings

With a total power budget of up to 60 watts for different kinds of PoE applications, the GUP-805A-60W provides a quick, safe and higher 802.3bt PoE++ network solution for small businesses and enterprises.

Model	PoE Standard	PoE Budget	LAN Port Speed	SFP Slot Speed
GUP-805A-60W	IEEE 802.3af/at/bt	60 watts	10M/100M/1000Mbps	100M/1000BASE-X

High Performance and Steady Network Communications Guaranteed Despite Distance Extension

The GUP-805A-60W extends communication distance with high Gigabit performance via SFP slot and SFP transceiver. The GUP-805A-60W provides media conversion between 10/100/1000BASE-T and 100/1000BASE-X interfaces for various fiber optic applications. The available SFP LC fiber interfaces are shown below:

Optic Mode	Connector Type	Distance
Multi-mode	Duplex LC	220m/550m/2km
Single mode	Duplex LC	20/40/60/80/120km
Single mode WDM	Simplex LC	2/10/20/40/80/120km

  802.3bt PoE++ and DIP Switch for PoE Power Output Mode Options

To meet the demand of various powered devices consuming stable PoE power, the GUP-805A-60W provides one DIP switch for multi-PoE operation modes that include 60-watt 802.3bt type-4 PoE++ mode, UPOE and legacy mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field.

• 802.3bt PoE++ Power Output Mode
• UPOE Power Output Mode
• Legacy Power Output Mode

PoE Mode	Function
BT	This mode fully supports IEEE 802.3af/at/bt standards.
UPOE	This mode fully supports Cisco UPoE standards or PoH standards.
Legacy	The legacy detection is to identify the valid current signature of the PDs that do not fully follow the IEEE 802.3af/at/bt standard. This protects against damage to the PDs as the right PoE mode is applied.

 

Specifications :

Interface
Copper Port	10/100/1000BASE-T Ethernet RJ45 interface Auto-negotiation, auto MDI/MDI-X with PoE injector function
SFP Interface	100/1000BASE-X SFP interface
Fiber Mode	May vary on SFP Module
Fiber Port Type (connector)	SFP, LC type
Fiber Maximum Distance	May vary on SFP Module
Power Over Ethernet
PoE Output	IEEE 802.3af Power over Ethernet PSE IEEE 802.3at Power over Ethernet Plus PSE IEEE 802.3bt Power over Ethernet Plus Plus PSE
Power Output	PoE 52-55V DC, 60 watts
PoE Power Budget	60 watts
PoE Power Supply Type	End-span + Mid-span
Power Pin Assignment	802.3bt: 1/2(-), 3/6(+), 4/5(+), 7/8(-) End-span: 1/2(-), 3/6(+) Mid-span: 4/5(+), 7/8(-)
Hardware Specifications
Enclosure	Metal case
Dimensions (W x D x H)	94 x 70 x 26 mm
Weight	144g
LED	System: PWR (Green) Fiber 100/1000BASE-X: LNK/ACT(Green) TP 10/100/1000BASE-T: LNK / ACT(Green) PoE: Power-in-use (Amber)
DIP Switch	PoE power feeding options (BT/UPOE/Legacy) selection
Power Supply	DC 52V~55V Power Socket, external AC-to-DC adapter
Installation	Wall-mount or DIN-rail installation(Optional)
Layer 2 Features
Switch Architecture	Store-and-Forward
Forwarding Rate	Non-blocking full wire-speed forwarding rate
Flow Control	Back pressure for half duplex mode IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size	9K
Standards Conformance
Regulatory Compliance	FCC Part 15 Class A, CE
Protocols and Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3ab Gigabit Ethernet over TP IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus
Cables	TP: Cat 3/4/5/5e/6 UTP cable Fiber: Multi-mode: 50/125m or 62.5/125μm optic fiber Single-mode: 9/125μm optic fiber
Environment
Temperature	Operating: 0 ~ 50 degrees C Storage: -10 ~ 70 degrees C
Humidity	5% ~ 95% non-condensing