E10M20-T1
search
  • E10M20-T1

Synology E10M20-T1 M.2 SSD & 10GbE Base-T Combo Adapter

฿9,550.00
Tax included

For Select Synology NAS Units , Create an SSD Cache via PCIe , Dual M.2 2280/22110 Slots , 10Gb Ethernet Port , PCIe 3.0 x8 Host Bus Interface , Low Profile and Full Height Form Factor

Quantity

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

E10M20-T1

 

Synology E10M20-T1 is a combo adapter card that incorporates both M.2 SSD and 10GbE connectivity, providing an effective solution to simultaneously boost I/O performance and networking bandwidth.

 

Highlights

  • Upgrade Your Synology System Immediately Boost I/O performance and networking bandwidth simultaneously

  • 10GbE Ready Single 10GBASE-T port capable of autonegotiating between 10/5/2.5/1Gbps and 100Mbps

  • NVMe SSD Enabled Dual M.2 22110/2280 NVMe SSD slots for cache acceleration without occupying storage drive bays

  • Reach Optimal Caching Performance Supports Synology SNV3000 series NVMe SSD with superior performance and reliability

 

10GbE Bandwidth and M.2 SSD Cache, All at Once

Synology E10M20-T1 is the solution for those who seek for a boost in I/O performance and acceleration of network speed but with a limited number of PCIe slots. Simply by attaching E10M20-T1 to your Synology system, you can enjoy a high data rate up to 10Gbps Ethernet with the support for 5-speed auto-negotiation. Also, you can benefit from accelerated random I/O performance through its dual M.2 22110 and 2280 NVMe SSD slots.

  

Designed for Synology SNV3000 Series NVMe SSD

Easily gain a reliable and streamlined storage experience for your Synology systems by adding an E10M20-T1 with Synology SNV3000 series NVMe SSD. The E10M20-T1 is designed for the SNV3000 series SSD and supports both low-profile and full-height installations. This card allows you to take full advantage of the enterprise-grade endurance and performance of SNV3000 series NVMe SSD.

 

Specifications :

Hardware Specifications

General

Host Bus Interface

PCIe 3.0 x8

Bracket Height

Low Profile and Full Height

Size (Height x Width x Depth)

71.75 mm x 200.05 mm x 17.70 mm

Operating Temperature

0°C to 40°C (32°F to 104°F)

Storage Temperature

-20°C to 60°C (-5°F to 140°F)

Relative Humidity

5% to 95% RH

Storage

Storage Interface

PCIe NVMe

Supported Form Factor

22110 / 2280

Connector Type and Quantity

M-key, 2 Slots

Network

IEEE Specification Compliance

  • IEEE 802.3x Flow Control

  • IEEE 802.3u Fast Ethernet

  • IEEE 802.3ab Gigabit Ethernet

  • IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet

  • IEEE 802.3an 10Gbps Ethernet

Data Transfer Rates

10 Gbps

Network Operation Mode

Full Duplex

Supported Features

  • 9 KB Jumbo Frame

  • TCP/UDP/IP Checksum Offloading

  • Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s

  • TCP Segmentation Offload (TSO)

  • Large Send Offload (LSO)

  • Receive Side Scaling (RSS)

  • Generic Receive Offload (GRO)

  • Generic Segmentation Offload (GSO)

Compatibility

Applied Models

NVMe SSD

  • SA series:SA3600, SA3400, SA6400, SA3610, SA3410

  • 23 series:RS2423RP+, RS2423+

  • 22 series:RS822RP+, RS822+, DS3622xs+, DS2422+

  • 21 series:RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+

  • 20 series:RS820RP+, RS820+

  • 19 series:DS2419+, DS2419+II, DS1819+

  • 18 series:RS3618xs, RS2818RP+, DS3018xs, DS1618+

  • 17 series:RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xs, DS3617xsII

Notes

  • DSM version requirement: 6.2.3-25426 or later version

  • DSM version requirement for RS18017xs+, RS4017xs+, RS3618xs, RS3617xs+, RS3617RPxs, DS3617xs and DS3617xsII: 7.0.1 or later version
E10M20-T1
100 Items

Data sheet

Warranty
5 Years

Specific References

Download

Datasheet - E10M20-T1

Download (1.66MB)
Comments (0)
No customer reviews for the moment.