Synology E10G18-T1 Single port 10 Gigabit Base-T PCIe 3.0 x4 Ethernet adapter
Supports 802.3an 10 Gb/s Ethernet , Supports 802.3bz 2.5 & 5 Gb/s , Ethernet , Supports 802.3ab Gigabit Ethernet , Supports 802.3u Fast , Ethernet , Supports 802.3x Flow Control , PCIe 3.0 x4 Interface , Full Duplex Network Operation Mode , Auto Bandwidth Negotiation
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
E10G18-T1
Equipped with an RJ-45 connector and supports IEEE 802.3an/bz (10GBASE-T/NBASE-T) and 802.3x, E10G18-T1 helps you smoothly migrate to a 10GbE networking environment with your existing infrastructure. Supporting backward compatibility and auto-negotiation between 10Gbps, 5Gbps, 2.5Gbps, 1Gbps and 100Mbps data rate, E10G18-T1 is an economic solution to overcome the data transmission bottleneck for small businesses and home users.
Specifications :
Hardware Specifications |
||
---|---|---|
General |
Host Bus Interface |
PCIe 3.0 x4 |
Bracket Height |
Low Profile and Full Height |
|
Size (Height x Width x Depth) |
86.0 mm x 68.1 mm x 13.6 mm |
|
Operating Temperature |
0°C to 40°C (32°F to 104°F) |
|
Storage Temperature |
-20°C to 60°C (-5°F to 140°F) |
|
Relative Humidity |
5% to 95% RH |
|
Network |
IEEE Specification Compliance |
|
Data Transfer Rates |
10 Gbps |
|
Network Operation Mode |
Full Duplex |
|
Supported Features |
|
|
Compatibility |
||
Applied Models |
|
|
Notes |
DSM version requirement: 6.2-23739-2 onward (or 6.1-15284-2 onward with DSM 6.1) |