Synology RX418 4-bay SATA expansion unit
4-bay SATA expansion unit for RS1219+, RS820RP+, RS820+, RS819, RS818RP+, RS818+, RS816, RS815RP+, RS815+, RS815
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
RX418
Synology RX418 delivers an effortless solution for volume expansion and data backup for Synology 1U RackStation1 by adding 4 additional SATA drive bays on-the-fly. With its short-depth chassis design, RX418 ensures easy installation and deployment in 2-post racks and wall mount racks.
Highlights
-
Plug-and-play design for seamless storage space upgrade
-
Online volume expansion
-
12-inch depth to fit in 2-post racks and wall mount racks
-
Energy-saving deep sleep mode
-
Managed from Synology DiskStation Manager (DSM)
Storage capacity expansion
When the storage capacity on Synology 1U RackStation reaches its limit, Synology expansion unit RX418 provides easy capacity expansion by adding 4 3.5"/2.5" SATA drives to the system. Synology RX418 can also be used as a dedicated local backup destination of Synology 1U RackStation for comprehensive data protection.
Reliable plug-and-play design
Simply connect Synology RX418 to corresponding Synology RackStation and it is ready to use. Drives in the connected Synology RX418 operate as though they were internal to the connected Synology NAS and can be managed directly by Synology DiskStation Manager (DSM), with no additional software installation required.
Green and easy to manage
Award-winning Synology DSM provides an intuitive user interface for easy system management. Drive hibernation can be configured in DSM to take effect automatically when the system has been inactive for a period of time. This not only saves energy but also extends the lifespan of the installed drives.
Specifications :
Applied Models |
Supports creating volumes across different units |
|
---|---|---|
Supports creating volumes on a single unit only |
RS217 |
|
Notes |
|
|
Storage |
Drive Bays |
4 |
Compatible Drive Type* (See all supported drives) |
|
|
Hot Swappable Drive* |
Yes |
|
RAID Management through Synology DSM |
Yes |
|
Notes |
It is strongly recommended that you only install drives listed on your device's compatibility list. Storage pool and volume creation processes may fail when using unverified drives. Synology is unable to provide technical support for devices using unsupported components. |
|
External Ports |
eSATA Port |
1 |
Appearance |
Size (Height x Width x Depth) |
44 mm x 430.5 mm x 290 mm |
Size (Height x Width x Depth) (with server ears) |
44 mm x 480 mm x 325 mm |
|
Weight |
4.28 kg |
|
Rack Installation Support* |
|
|
Notes |
The rail kit is sold separately |
|
Power |
Power Recovery |
Synchronized with the Synology RackStation |
Power Supply Unit / Adapter |
100 W |
|
AC Input Power Voltage |
100V to 240V AC |
|
Power Frequency |
50/60 Hz, Single Phase |
|
Power Consumption |
23.26 W (Access) 6.39 W (HDD Hibernation) |
|
British Thermal Unit |
79.42 BTU/hr (Access) 21.82 BTU/hr (HDD Hibernation) |
|
Notes |
Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s). |
|
Temperature |
Operating Temperature |
5°C to 35°C (40°F to 95°F) |
Storage Temperature |
-20°C to 60°C (-5°F to 140°F) |
|
Relative Humidity |
5% to 95% RH |
|
Others |
System Fan |
40 mm x 40 mm x 3 pcs |
Noise Level* |
25.1 dB(A) |
|
Notes |
Noise Level Testing Environment: Fully loaded with Seagate 1TB ST31000520AS hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8% |
|
Certification |
|