Planet IGS-20160HPT 16 x 10/100/1000T 802.3at PoE + 2 x 10/100/1000T + 2 x 100/1000X SFP Managed Industrial Switch
Industrial L3 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
IGS-20160HPT
Industrial L3 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch
Advanced Manageable PoE Solution for Hardened Environment
PLANET IGS-20160HPT L3 Industrial Managed PoE+ Switch, featuring 16 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 100/1000/2500BASE-X SFP ports in an IP30 rugged metal case, can be installed in any difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2 dynamic routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Specifications :
Hardware Specifications |
|
---|---|
Copper Ports |
18 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots |
2 1000/2500BASE-X SFP interfaces (Port-19 and Port-20) Compatible with 100BASE-FX SFP |
PoE Injector Port |
16 ports with 802.3at/af PoE injector function with Port-1 to Port-16 |
Console |
1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
Reset Button |
< 5 sec: System reboot > 5 sec: Factory default |
ESD Protection |
6KV DC |
Enclosure |
IP30 aluminum case |
Installation |
DIN-rail kit and wall-mount kit |
Connector |
Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND |
Alarm |
One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC |
DI,DO |
2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24V DC, 100mA max. |
Dimensions (W x D x H) |
86 x 107 x 152 mm |
Weight |
1548g |
Power Requirements |
Dual 48~56V DC (>51V DC for PoE+ output recommended) |
Power Consumption |
Max. 27 watts/92BTU (Power on without any connection) Max. 361 watts/1231BTU (Full loading with PoE function) |
LED Indicator |
System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) Ring Owner (Green) DI/DO (Red) Per 10/100/1000T RJ45 PoE+ Ports: PoE-in-Use (Amber) LNK/ACT (Green) Per 10/100/1000T RJ45Ports: 1000 LNK/ACT (Green) 100 LNK/ACT (Amber) Per SFP Interface: 10/100 LNK/ACT (Amber) 1G/2.5G LNK/ACT (Green) |
Switching |
|
Switch Architecture |
Store-and-Forward |
Switch Fabric |
46Gbps/non-blocking |
Throughput (packet per second) |
34.2Mpps@ 64 bytes packet |
Address Table |
32K entries, automatic source address learning and aging |
Shared Data Buffer |
32Mbits |
Flow Control |
IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
Jumbo Frame |
10K bytes |
Power Over Ethernet |
|
PoE Standard |
IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type |
End-span |
PoE Power Output |
IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 36 watts |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Budget |
48V Power input - 240W maximum (depending on power input) 52~56V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 320W maximum (depending on power input) ※Dual power input must be the same as DC voltage, like dual 56V |
Max. Number of Class 2 PDs |
16 |
Max. Number of Class 3 PDs |
16 |
Max. Number of Class 4 PDs |
10 |
Layer 3 Functions |
|
IP Interfaces |
Max. 128 VLAN interfaces |
Routing Table |
Max. 128 routing entries |
Routing Protocols |
IPv4 hardware static routing IPv6 hardware static routing IPv4 OSPFv2 dynamic routing |
Layer 2 Function |
|
Port Configuration |
Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Power saving mode control |
Port Status |
Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
Port Mirroring |
TX / RX / Both Many-to-1 monitor |
VLAN |
802.1Q tag-based VLAN, up to 4K VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN VLAN Translation Voice VLAN MVR (Multicast VLAN Registration) GVRP Up to 4K VLAN groups, out of 4094 VLAN IDs |
Link Aggregation |
IEEE 802.3ad LACP/static trunk Supports 10 trunk groups with 4 ports per trunk group |
Spanning Tree Protocol |
IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol |
QoS |
Traffic classification based, strict priority and WRR 8-level priority for switching - Port number - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet |
IGMP Snooping |
IPv4 IGMP (v1/v2/v3) snooping IPv4 IGMP querier mode support Up to 255 multicast groups |
MLD Snooping |
IPv6 MLD (v1/v2) snooping IPv6 MLD querier mode support Up to 255 multicast groups |
Bandwidth Control |
Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps |
Security Functions |
|
Access Control List |
IP-based ACL/MAC-based ACL ACL based on: - MAC Address - IP Address - Ethertype - Protocol Type - VLAN ID - DSCP - 802.1p Priority Up to 256 entries |
Security |
Port Security IP source guard Dynamic ARP inspection Command line authority control based on user level |
AAA |
RADIUS client TACACS+ client |
Network Access Control |
IEEE 802.1x port-based network access control MAC-based authentication Local/RADIUS authentication |
Switch Management |
|
Basic Management Interfaces |
Console; Telnet; Web browser; SNMP v1, v2c |
Secure Management Interfaces |
SSHv2, TLS v1.2, SNMP v3 |
System Management |
Firmware upgrade by HTTP protocol through Ethernet network Configuration upload/download through HTTP Remote syslog System log LLDP protocol NTP PLANET Smart Discovery Utility |
Event Management |
Remote syslog Local system log SMTP |
ONVIF |
ONVIF device discovery ONVIF device monitoring Floor Map |
SNMP MIBs |
RFC 1213 MIB-II RFC 2863 IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2737 Entity MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2618 RADIUS Client MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Power over Ethernet MIB |
Standards Conformance |
|
Regulatory Compliance |
FCC Part 15 Class A, CE |
Stability Testing |
IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
Standards Compliance |
IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3ah OAM IEEE 802.1ag Connectivity Fault Management (CFM) IEEE 1588 PTPv2 RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP version 3 RFC 2710 MLD version 1 RFC 3810 MLD version 2 ITU G.8032 ERPS Ring ITU-T Y.1731 Performance Monitoring |
Environment |
|
Operating Temperature |
-40 ~ 75 degrees C |
Storage Temperature |
-40 ~ 85 degrees C |
Humidity |
5 ~ 95% (non-condensing) |