Planet IGS-4215-8P2T2S Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/100T + 2-Port 100/1000X SFP Managed Switch
Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
IGS-4215-8P2T2S
Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/100T + 2-Port 100/1000X SFP Managed Switch
Cost-optimized Full PoE+ Power Solution Ideal for Hardened Environment
Designed to be installed in heavy industrial demanding environments, the IGS-4215-8P2T2S is the new member of PLANET Industrial-grade, DIN-rail type L2/L4 Managed Gigabit PoE+ Switch family featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 8 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+, 2 additional Gigabit copper ports and another 2 extra 100/1000BASE-X SFP fiber slots for data and video uplink. The IGS-4215-8P2T2S is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with a total power budget of up to 240 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing
Specifications :
Hardware Specifications |
|
---|---|
Copper Ports |
Ten 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports (Ports 1 to 10) |
PoE Injector Port |
Eight ports with 802.3af/802.3at PoE+ injector function (Ports 1 to 8) |
SFP Ports |
Two 1000BASE-SX/LX/BX SFP interfaces (Ports 11 to 12) Compatible with 100BASE-FX SFP |
Console |
1 x RS232-to-RJ45 serial port (115200,8, N, 1) |
Reset Button |
< 5 sec: System reboot > 5 sec: Factory default |
Connector |
Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
Alarm |
One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC |
Power Requirements |
48~54V DC, 6A (max.) (>51V DC for PoE+ output recommended) |
Power Consumption/ Dissipation |
Max. 6.72 watts/22.91BTU (system on) Max. 252 watts/859.32BTU (Full loading) |
Dimensions (W x D x H) |
76.8 x 107.3 x 152 mm |
Weight |
1084g |
Enclosure |
IP30 aluminum case |
Installation |
DIN-rail kit and wall-mount ear |
ESD Protection |
Contact Discharge 6KV DC Air Discharge 8KV DC |
LED |
System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) R.O.(Green) Per 10/100/1000T RJ45 PoE+ Ports: PoE-in-Use (Amber) LNK/ACT (Green) Per 10/100/1000T RJ45Ports: 1000 LNK/ACT (Green) 10/100 LNK/ACT (Amber) Per SFP Interface: 1000 LNK/ACT (Green) 10/100 LNK/ACT (Amber) PoE Usage: 60W, 120W, 180W, 240W (Amber) |
Switching Specifications |
|
Switch Architecture |
Store-and-Forward |
Switch Fabric |
24Gbps/non-blocking |
Switch Throughput@64 bytes |
17.85Mpps @64 bytes |
MAC Address Table |
8K entries |
Shared Data Buffer |
4.1 megabits |
Flow Control |
IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
Jumbo Frame |
10 Kbytes |
Power over Ethernet |
|
PoE Standard |
IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type |
End-span |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Output |
IEEE 802.3af Standard Per port 48V~51V DC, max. 15.4 watts IEEE 802.3at Standard Per port 51V~54V DC, max. 36 watts |
PoE Power Budget |
Dual power input: maximum 240W (depending on power input) |
Max. Number of Class 2 PDs |
8 |
Max. Number of Class 3 PDs |
8 |
Max. Number of Class 4 PDs |
8 |
PoE Management Functions |
|
PoE Management |
PD Alive Check Scheduled Power Recycling PoE Schedule PoE Usage Monitoring PoE Extension |
Enhanced PoE Mode |
Standard/Legacy/Force |
Active PoE Device Live Detection |
Yes |
PoE Power Recycling |
Yes, daily or predefined schedule |
PoE Schedule |
4 schedule profiles |
PoE Extend Mode |
Yes, max. up to 250 meters |
Layer 2 Functions |
|
Port Mirroring |
TX/RX/Both Many-to-1 monitor Up to 4 sessions |
VLAN |
802.1Q tagged VLAN 802.1ad Q-in-Q tunneling (VLAN stacking) Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP Management VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs |
Link Aggregation |
IEEE 802.3ad LACP and static trunk Supports 6 groups with 8 ports per trunk |
Spanning Tree Protocol |
IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) STP BPDU Guard, BPDU Filtering and BPDU Forwarding |
IGMP Snooping |
IPv4 IGMP snooping v2, v3 IGMP querier Up to 256 multicast groups |
MLD Snooping |
IPv6 MLD snooping v2, v3, up to 256 multicast groups |
Access Control List |
IPv4/IPv6 IP-based ACL/MAC-based ACL IPv4/IPv6 IP-based ACE/MAC-based ACE |
QoS |
8 mapping IDs to 8 level priority queues Port number 802.1p priority DSCP/IP precedence of IPv4/IPv6 packets Traffic classification based, strict priority and WRR Ingress/Egress Rate Limit per port bandwidth control |
Ring |
Supports ERPS, and complies with ITU-T G.8032 Recovery time < 450ms |
Security Functions |
|
Access Control List |
IPv4/IPv6 IP-based ACL/MAC-based ACL IPv4/IPv6 IP-based ACE/MAC-based ACE Max. 256 ACL entries |
Port Security |
IEEE 802.1X – Port-based authentication Built-in RADIUS client to co-operate with RADIUS server RADIUS/TACACS+ user access authentication |
MAC Security |
IP-MAC port binding MAC filter Static MAC address, max. 256 static MAC entries |
Enhanced Security |
DHCP Snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard |
Management Functions |
|
Basic Management Interfaces |
RS232 to RJ45 Console Web browser Telnet SNMP v1, v2c |
Secure Management Interfaces |
SSHv2, TLS v1.2, SNMP v3 |
System Management |
Firmware upgrade by HTTP/TFTP protocol through Ethernet network Configuration upload/download through HTTP/TFTP LLDP protocol SNTP PLANET Smart Discovery Utility PLANET NMS System/CloudViewer |
Event Management |
Remote/Local Syslog System log |
SNMP MIBs |
RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB RFC 2674 Bridge MIB Extensions RFC 2737 Entity MIB (Version 2) RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB RFC 3621 Power Ethernet MIB |
Standards Conformance |
|
Regulatory Compliance |
FCC Part 15 Class A, CE |
Stability Testing |
IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Standards Compliance |
IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port Trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az for Energy-Efficient Ethernet RFC 768 UDP RFC 783 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 ITU G.8032 ERPS Ring |
Environment |
|
Operating Temperature |
-40 ~ 75 degrees C |
Storage Temperature |
-40 ~ 85 degrees C |
Humidity |
5 ~ 95% (non-condensing) |