Planet IGS-5225-4P2S 4 x GbE PoE 802.3at + 2 SFP L2+ Managed Industrial PoE Switch
L2+ Industrial 4-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Ethernet Switch
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
IGS-5225-4P2S
4 x GbE PoE 802.3at + 2 SFP L2+ Managed Industrial PoE Switch
PLANET IGS-5225-4P2S L2+ Industrial Managed PoE+ Switch, featuring 4 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 2 100/1000X fiber ports in an IP40 rugged but compact-sized case, can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Specifications :
Hardware Specifications |
|
---|---|
Copper Ports |
4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots |
2 1000BASE-SX/LX/BX SFP interfaces (Port-5 to Port-6) Compatible with 100BASE-FX SFP |
PoE Injector Port |
4 ports with 802.3at/af PoE injector function with Port-1 to Port-8 |
Console |
1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
12Gbps/non-blocking |
Throughput (packet per second) |
8.928Mpps@ 64 bytes packet |
Address Table |
8K entries, automatic source address learning and aging |
Shared Data Buffer |
4Mbits |
Flow Control |
IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
Jumbo Frame |
9Kbytes |
Reset Button |
<5 sec: System reboot >5 sec: Factory default |
ESD Protection |
6KV DC |
Enclosure |
IP40 metal case |
Installation |
DIN-rail kit and wall-mount kit |
Connector |
Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 |
Alarm |
One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC |
LED Indicator |
System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) Ring Owner (Green) Per 10/100/1000T RJ45 PoE+ Ports: PoE-in-Use (Orange) LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) |
Dimensions (W x D x H) |
50 x 87.8 x 135 |
Weight |
610g |
Power Requirements |
Dual 48~56V DC (>51V DC for PoE+ output recommended) |
Power Consumption |
Max. 6.2 watts/26.76BTU (Power on without any connection) Max. 151.8 watts/520.82BTU (Full loading with PoE function) |
Power Over Ethernet |
|
PoE Standard |
IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type |
End-span |
PoE Power Output |
IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 36 watts |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Budget |
Dual power input: 144W maximum (depending on power input) |
Max. Number of Class 2 PDs |
4 |
Max. Number of Class 3 PDs |
4 |
Max. Number of Class 4 PDs |
4 |
Layer 2 Function |
|
Basic Management Interfaces |
Console; Telnet; Web browser; SNMP v1, v2c |
Secure Management Interfaces |
SSH, SSL, SNMP v3 |
Port Configuration |
Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Power saving mode control |
Port Status |
Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
Port Mirroring |
TX/RX/both 1 to 1 monitor |
VLAN |
IEEE 802.1Q tag-based VLAN, up to 255 VLAN groups IEEE 802.1ad Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) GVRP Up to 255 VLAN groups, out of 4094 VLAN IDs |
Link Aggregation |
IEEE 802.3ad LACP/static trunk Supports 2 trunk groups with 2 ports per trunk group |
QoS |
Traffic classification based, strict priority and WRR 8-level priority for switching - Port number - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet |
IGMP Snooping |
IPv4 IGMP (v1/v2/v3) snooping, up to 255 multicast groups IPv4 IGMP querier mode support |
MLD Snooping |
IPv6 MLD (v1/v2) snooping, up to 255 multicast groups IPv6 MLD querier mode support |
Access Control List |
IP-based ACL/MAC-based ACL Up to 123 entries |
Bandwidth Control |
Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps |
SNMP MIBs |
RFC 1213 MIB-II IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB |
Layer 3 Function |
|
IP Interfaces |
Max. 8 VLAN interfaces |
Routing Table |
Max. 32 routing entries |
Routing Protocols |
IPv4 software static routing IPv6 software static routing |
Standards Conformance |
|
Regulatory Compliance |
FCC Part 15 Class A, CE |
Stability Testing |
IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
Standards Compliance |
IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3ah OAM IEEE 802.1ag Connectivity Fault Management(CFM) IEEE 802.3az Energy Efficient Ethernet(EEE) IEEE 1588 PTPv2 RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 ITU G.8032 ERPS Ring ITU-T G.8032 ERPS Ring ITU-T Y.1731 Performance Monitoring |
Environment |
|
Operating Temperature |
-40 ~ 75 degrees C |
Storage Temperature |
-40 ~ 85 degrees C |
Humidity |
5 ~ 95% (non-condensing) |