Ruijie RG-AP680(CD) Wi-Fi 6 Dual Radio 2400 Mbps Outdoor High Power Wireless AP, 1 Gbps Optical Port
Wi-Fi 6 (802.11ax) outdoor wireless access point, dual-band dual-radio, up to [email protected], 1200Mbps@5G and 1775Mbps per AP, 4 spatial streams, built-in directional antenna, support 802.11a/b/g/n/ac and 802.11ax, FAT/FIT mode, 1 SFP port and 1 10/100/1000M port, PoE or local power supply, bundled with Ruijie Cloud Service lifetime license
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
RG-AP680(CD)
Wi-Fi 6 Dual Radio 2400 Mbps Outdoor High Power Wireless AP, 1 Gbps Optical Port
Features :
-
Industrial-rated design, IP68 rating, 9 kV surge protection, and a wide operating temperature range (–40°C to +65°C)
-
Optical port and electrical port for flexible networking
-
2400 Mbps ultra-fast speed with Wi-Fi 6
-
Unified WIS cloud management for efficient O&M without site visits
Specifications :
Dimensions and Weight |
RG-AP680(CD) |
Unit dimensions (W x D x H) |
251 mm x 168 mm x 64 mm (9.88 in x 6.61 in x 2.52 in) |
Shipping dimensions (W x D x H) |
405 mm x 232 mm x 325 mm (15.94 in x 9.13 in x 12.80 in) |
Unit weight |
Main unit: 1.5 kg (3.31 lbs) Mounting bracket: 0.2 kg (0.44 lbs) |
Shipment weight |
2.92 kg (6.44 lbs) |
Mounting |
Wall/Pole-mount (a mounting bracket is delivered with the main unit) |
Wi-Fi Radio |
RG-AP680(CD) |
Radio design |
Dual-radio and up to four spatial streams: ● Radio 1: 2.4 GHz/5 GHz, two spatial streams, 2x2 MU-MIMO ● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO |
Operating frequencies |
Radio 1: 802.11b/g/n/ax ● 2.400 GHz to 2.483 GHz, channels 1 to 13 Radio 2: 802.11a/n/ac/ax ● 5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48 ● 5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64 ● 5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 ● 5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165 Note: Country-specific restrictions apply. |
Data rates |
Combined peak date rate for 2.4 GHz and 5 GHz radios: 1.775 Gbps Combined peak date rate for 5 GHz and 5 GHz radios: 2.4 Gbps Radio 1: 2.4 GHz: 574 Mbps ● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max.) ● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical) 5 GHz: 1.2 Gbps ● Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (max.) ● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (typical) ● Two spatial stream Multi-User (MU) MIMO for up to 1.2 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (max.) ● Two spatial stream Multi-User (MU) MIMO for up to 574 Mbps wireless data rate to up to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) Radio 2: 5 GHz, 1.2 Gbps ● Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (max.) ● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (typical) ● Two spatial stream Multi-User (MU) MIMO for up to 1.2 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (max.) ● Two spatial stream Multi-User (MU) MIMO for up to 574 Mbps wireless data rate to up to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) |
Data rate set |
The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio ● 802.11b: 1, 2, 5.5, 11 ● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ac: 6.5 to 400 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT40) ● 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 5 GHz radio ● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80) ● 802.11ax: 8.6 to 1,200 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80) |
Packet aggregation |
802.11n/ac/ax: A-MPDU and A-MSDU |
Antenna type |
Built-in intelligent antenna |
Max. antenna gain |
2.4 GHz radio: 9 dBi 5 GHz radio: 9 dBi |
Max. transmit power |
2.4 GHz radio: 28 dBm (25 dBm per chain) 5 GHz radio: 28 dBm (25 dBm per chain) Note: The transmit power is limited by local regulatory requirements. |
Power increment |
Configurable in increments of 1 dBm |
Radio technologies |
802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA) |
Modulation types |
802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM |
Bluetooth Radio |
RG-AP680(CD) |
Bluetooth |
Bluetooth 5.0 |
Antenna type |
Integrated omnidirectional antenna |
Max. antenna gain |
4.5 dBi |
Max. transmit power |
10 dBm |
Receive sensitivity |
-88 dBm (@BLE) |
Ports |
RG-AP680(CD) |
Fixed service port |
1 x 10/100/1000Base-T Ethernet port, supporting PoE input 1 x GE SFP port |
Fixed management port |
1 x RJ45 console port (serial console port) |
Status LED |
1 x multi-color system status LED 3 x single-color RSSI LEDs |
Button |
1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 3 seconds. Then the device restores to factory settings. |
WLAN |
RG-AP680(CD) |
Max. number of associated STAs |
1,024 (up to 512 STAs per radio) |
Max. number of BSSIDs |
32 (up to 16 BSSIDs per radio) |
STA management |
SSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote intelligent perception technology (RIPT) Intelligent client identification technology Intelligent load balancing based on the STA quantity or traffic |
STA limiting |
SSID-based STA limiting Radio-based STA limiting |
Bandwidth limiting |
STA/SSID/AP-based rate limiting |
Wireless roaming |
Layer 2 and Layer 3 roaming |
Security |
RG-AP680(CD) |
Authentication and encryption |
Remote Authentication Dial-In User Service (RADIUS) PSK and web authentication QR code-based guest authentication (used with the RG-WS series wireless access controller) SMS authentication (used with the RG-WS series wireless access controller) MAB authentication (used with the RG-WS series wireless access controller) Data encryption: WPA (TKIP), WPA-PSK, WPA2 (AES), WEP (64/128-bit) |
Data frame filtering |
Allowlist, static blocklist, and dynamic blocklist |
WIDS |
User isolation Rogue AP detection and containment |
ACL |
Dynamic ACL assignment |
CPP |
Supported |
NFPP |
Supported |
Routing and Switching |
RG-AP680(CD) |
IP service |
Static IPv4 address IPv4 DHCP Client NAT FTP ALG and NAT DNS ALG |
Multicast |
Multicast-to-unicast conversion |
IPv6 basics |
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping IPv6 DHCP Client |
IP routing |
IPv4/IPv6 static routing |
VPN |
PPPoE Client IPsec VPN |