Ruijie RG-AP840-I Wireless Access Point Wi-Fi 6 (802.11ax), Speed 5.2Gbps Dual-band 2.4&5GHz, Ant 3dBi, 3 Port Gigabit PoE
฿19,100.00
Tax included
Indoor high-density 802.11ax wireless access point, dual-radio dual-band, up to 400Mbps for 2.4G (2*2 MIMO), up to 4.8Gbps for 5G (4*4 MIMO), up to 6 spatial streams, wireless access rate up to 5.2Gbps per AP. Supports concurrent 802.11a/b/g/n/ac and 802.11ax, FAT/FIT modes, PoE+ and local power supply (PoE+ and local power adapters are sold separately)
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
RG-AP840-I
Wireless Access Point
Features :
-
Max 5.2Gbps (Total 6 Spatial Streams) with Concurrent Dual-Band Design
-
Max 1024 Client connections
-
OFDMA, MU-MIMO and BSS Technology for minimal wireless signal interference
-
IoT Ready: Integrated with BLE module and one IoT extension port with PoE Out (passive)
-
AI Wireless Optimization: one-click optimization powered by Ruijie WIS technology
-
Hybrid Management: support standalone AP to over thousands of APs with deployment options of appliances, private cloud or public cloud service
-
Mobility Management: Free mobile app available for RG-MACC-Base private cloud or Ruijie Public Cloud customers
Specifications :
| Model | RG-AP840-I | |
| Hardware specifications | ||
| Radio | Dual-radio dual-band：Radio 1: 2.4G 11n: 2×2 MIMORadio 2: 5G 11ax: 4x4 MIMO | |
| Protocol | Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac | |
| Operating Bands | 802.11b/g/n ：2.4G ~ 2.483GHz802.11a/n/ac/ax ： 5.150～5.350GHz，5.47～5.725GHz，5.725～5.850GHz (vary depending on different countries) | |
| Spatial Streams | Up to 6: 2×2:2 in 2.4GHz , 4×4:4 in 5GHz | |
| Max Throughput | Maximum throughput of 2.4G: 400MbpsMaximum throughput of 5G: 4.8GbpsMaximum throughput per AP: 5.2Gbps | |
| Modulation | OFDM：BPSK@6/9Mbps，QPSK@12/18Mbps，16-QAM@24Mbps，64-QAM@48/54MbpsDSSS：DBPSK@1Mbps，DQPSK@2Mbps，and [email protected]/11MbpsMIMO-OFDM：BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAMOFDMA (up to 1024-QAM) | |
| Receiver Sensitivity | 11b：-96dBm（1Mbps），-93dBm（5Mbps），-89dBm（11Mbps）11a/g：-91dBm（6Mbps），-85dBm（24Mbps），-80dBm（36Mbps），-74dBm（54Mbps）11n：-90dBm（MCS0），-70dBm（MCS7），-89dBm（MCS8），-68dBm（MCS15）11ac HT20：-88dBm（MCS0）, -63dBm（MCS9）11ac HT40：-85dBm（MCS0）, -60dBm（MCS9）11ac HT80：-82dBm（MCS0）, -57dBm（MCS9）11ax HT80：-82dBm（MCS0）, -57dBm（MCS9）, -52dBm（MCS11）11ax HT160：-80dBm（MCS0）, -49dBm（MCS11） | |
| Antenna | Integrated antenna design | |
| Antenna Gain | 2.4G: 3dBi5G: 3dBi | |
| Service Ports | 3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out) | |
| Management Port | 1 console port | |
| USB | 1 USB 2.0 port | |
| IoT Capability | BLE | |
| Reset Button | Support | |
| Anti-theft Lock | Support | |
| LED Indicator | 1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.) | |
| Transmit Power | ≤100mw（20dBm） (vary depending on different countries) | |
| Adjustable Power | 1dBm | |
| Power Supply | Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed.)PoE+ (802.3at)PoE (802.3af) – Not recommended: 5G radio is degraded to 2x2 MIMO, and the PoE out of the LAN3/ IoT port is disabled | |
| Power Consumption | ＜25.4W | |
| Physical Specifications | ||
| Temperature | Operating Temperature: -10°C to 50°C | |
| Storage Temperature: -40°C to 70°C | ||
| Humidity | Operating Humidity: 5% to 95% (non-condensing) | |
| Storage Humidity: 5% to 95% (non-condensing) | ||
| Installation Mode | Ceiling/wall-mountable | |
| Dimensions (W x D x H) | 220mm ×220mm x48.85mm（Height of the AP only, excluding the mount kit） | |
| Weight | 1.30kg | |
| MTBF | 250,000 hours | |
| Certifications and Compliance | ||
| Safety Standard | GB4943, EN/IEC 60950-1 | |
| EMC Standard | GB9254, EN301 489EN 55032 , EN 61000, EN 55035 | |
| Health Standard | EN 62311 | |
| Radio Standard | SRRC, EN300 328, EN301 893 | |
| Software Specifications | ||
| WLAN | Maximum clients per AP | 1024 (Recommended Clients: 64) |
| BSSID capacity | Up to 32 | |
| SSID hiding | Support | |
| 5G Priority (Band Steering) | Support | |
| Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID | Support | |
| Remote Intelligent Perception Technology (RIPT) | Support | |
| Intelligent device recognition technology | Support | |
| Intelligent load balancing based on the number of users or traffic | Support | |
| STA control | SSID/radio-based | |
| Bandwidth control | STA/SSID/AP-based bandwidth control | |
| Data encryption | WPA（TKIP）, WPA-PSK, WPA2（AES）, WPA3, WEP（64/128 bits） | |
| PSK and web authentication | Support | |
| PPSK authentication (For Employee) | Support (require wireless controller) | |
| 802.1x authentication | Support | |
| PEAP authentication | Support | |
| Data frame filtering | Whitelist, static/dynamic blacklist | |
| User isolation | Support | |
| Rogue AP detection and countermeasure | Support | |
| Dynamic ACL assignment | Support | |
| RADIUS | Support | |
| CPU Protection Policy (CPP) | Support | |
| Network Foundation Protection Policy (NFPP) | Support | |
| IP | IPv4 and IPv6 address | Support |
| Multicast routing | Multicast to unicast conversion | |
| DHCP service | DHCP Snooping, Option 82, Server, Client | |
| Management and Maintenance | Supported wireless LAN controllers | Ruijie WS Series Wireless ControllerRuijie MACC-Base Software ControllerRuijie Cloud (Public Cloud) |
| Management protocol | Telnet, SSH, TFTP, Web | |
| Wireless Intelligent AI Optimization Service (WIS) | Support | |
| SNMP | SNMPV1,V2c,V3 | |
| Syslog / Debug | Support | |
| FAT/FIT/MACC mode switching | Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management | |
RG-AP840-I
100 Items
Data sheet
- Warranty
- 3 Years
Specific References
Comments (0)
No customer reviews for the moment.
Indoor high-density 802.11ax wireless access point, dual-radio dual-band, up to 400Mbps for 2.4G (2*2 MIMO), up to 4.8Gbps for 5G (4*4 MIMO), up to 6 spatial streams, wireless access rate up to 5.2Gbps per AP. Supports concurrent 802.11a/b/g/n/ac and 802.11ax, FAT/FIT modes, PoE+ and local power supply (PoE+ and local power adapters are sold separately)